Posted on by .

There are four different types of Oil Change Services at Walmart namely:


  1. Pit Crew Oil Change: Walmart’s Pit Crew Oil Change service includes using up to 5 quarts of Quaker State Advanced Durability conventional motor oil (5W-20, 5W-30 or 10W-30) and a new oil filter. In addition, the chassis of your vehicle is lubricated where necessary, your Battery performance is checked and your tire pressure is checked and adjusted accordingly.

    The price is $19.88


  1. Standard Oil Change: Walmart’s Standard Oil Change service includes using up to 5 quarts of featured conventional oil and a new oil filter. In addition, chassis lubrication is done where applicable, together with all the services listed under Lube Services. Additional charge may apply for non-featured oils.

    The price is $29.88


  1. High Mileage Oil Change: Walmart’s High Mileage Oil Change service includes using up to 5 quarts of featured High Mileage or Semi-Synthetic oil, and a new oil filter. Chassis lubrication is also done where applicable, together with all the services listed under Lube Services. High Mileage oils are recommended for vehicles with more than 75,000 miles. Semi-Synthetic oils that are GM Dexos compliant are also included in this package. (See your owner’s manual for requirements.)

    The price is $39.88


  1. Power & Performance: Walmart’s Power & Performance service includes using up to 5 quarts of featured Synthetic motor oil and a new oil filter. Chassis lubrication is done where applicable together with all of the services listed under Lube Services. The Power & Performance Package includes Full-Synthetic oils that are required for many newer vehicles. (See your owner’s manual for requirements.)

    The price is $49.88

Walmart oil change costOil Change Prices

Oil change prices constantly fluctuate because of increasing cost of overhead, location, and inflation.

According to Walmart’s Tire and Lube auto service center the latest prices are:

Pit Crew oil change $19.88
Standard oil change $29.88
High Mileage oil change $39.88
Power & Performance oil change $49.88

The choice of which Walmart Oil Change service is right or best for you depends mainly on the age or mileage of your vehicle. Internal seals and gaskets of your vehicle normally become brittle and shrink as they age, making oil to seep out. This seeping out of oil can sometimes become visible as oil stains on a garage floor or becomes visible on lower engine parts. When the valve-guide seals wear out, the oil can leak into the combustion chambers making the engine to start burning oil. If the leak is small, the blue smoke generated by the burning oil may not be visible from the exhaust, but your oil level will probably drop constantly below the full mark.

There are seal conditioners in high-mileage oils which are capable of reducing or eliminating small leaks and seepage by reactivating seals to their original shape and size. It may not be worth the extra cost going for high mileage oil change if your engine is not leaking or burning oil, and it is using like less than a quart of oil over 6,000 miles or so. However, it may be advisable no matter what, if your car mileage has attained like 100,000 miles.

In addition to having seal conditioners, high-mileage oils usually make claim to containing more detergents that clean out sludge inside the engine, in addition to other additives meant to reduce wear on moving parts.

Although some mechanics recommend switching to thicker (higher viscosity) oil like 10W30 instead of 5W20, or using oil additives to stop oil leaks, it is not desirable. This is because thicker oil can make an engine harder to start in cold weather, reduces oil circulation around the engine and increases oil pressure. Consequently, there will be more pressure in trying to push the oil past the seals and the gaskets.



How to Change Power Steering Fluid and Why!

Posted on by .

When most people think of changing fluids and oil in their car they most often think of engine oil or transmission fluid. Rarely does anyone give any thought to changing power steering fluid. This is unfortunate because even though it is often overlooked, power steering fluid is integral to the safe operation of your car. A power steering system works by using hydraulic pressure to assist in turning the wheels. This is done by using a pump and hydraulic fluid that flows through hydraulic lines. In a vehicle, these components are referred to as the powering steering pump, power steering fluid, and power steering lines.

The fluid in this system will, over time, degrade and can cause premature failure of the power steering pump. This is why you should know about performing a power steering fluid change.When to Change Power Steering Fluid The power steering fluid in your car will begin to break down and get contaminated over time. Seals and gaskets start to deteriorate and the little pieces will float around in the your fluid. Sometimes dirt can enter through the cap, and let’s not forgot that the fluid constantly cycles from cold to hot and back to cold as the car is driven and parked. At some point you’ll probably want to change the power steering fluid in your car. Generally speaking most car manuals don’t have a specified time interval or mileage at which you should change the fluid. If your car has an indication of when to change the fluid then be certain to follow it.

For everyone else plan to change it every 50,000 miles or 5 years, which ever comes first. Some car manufacturers claim to use lifetime fluid, but what they consider lifetime and what you consider lifetime could be two very different things, so I’d recommend changing it. You aren’t going to hurt anything by putting fresh power steering fluid in your car. Another way to tell if it’s time to change the fluid is by looking at it. If it’s brown, change it. The fluid should be pinkish or red and will start to turn brown as it breaks down and gets contaminated. Now that you know how often to change power steering fluid, let’s find out why you should do it.

Why You Should do a Power Steering Fluid Change

As the power steering fluid in your car’s power steering system breaks down it causes more wear and tear on the components. The fluid becomes less efficient at staying cool and doing it’s job, which is to provide hydraulic pressure to assist you in steering your car. Bad fluid can cause premature failure of your power steering pump, which in most vehicles runs at least a couple hundred dollars. If the pump should fail while you are driving it could be a serious safety concern. A car equipped with a power steering system becomes quite difficult to steer when that system fails. So what about power steering fluid change cost? Well it’s pretty inexpensive compared to having to replace a pump. You won’t spend more than $10 on the new fluid and you can pick up a fluid transfer tool for $10-$20 which will be a one time cost. It’s well worth doing.

How to Change Power Steering Fluid

So now we can get down to the nitty gritty. First things first though, make sure you have the following items ready before starting this job.

  • Fluid Transfer Tool
  • New Power Steering Fluid
  • Funnel
  • Shop Rags

This is actually a pretty easy process and I think most anybody can handle this. I’ll break it down into some easy to follow steps, just remember to take your time as you go along so you don’t make any mistakes. So grab your supplies and let’s get started!Remove the Power Steering cap – This may sound easy and obvious, but there is something to note here. Take one of your shop rags and clean around your power steering cap and reservoir before taking the cap off. This will ensure you don’t knock any contaminates down into the power steering reservoir and pump. In fact, this is good practice when removing any caps on your car before checking or filling fluids.Fluid Removal Tool, Stat! – With your fluid transfer tool in hand you’re ready to remove the old power steering fluid from the reservoir. Exactly how this is done will depend on the type of tool you purchased. I have one where you insert the tube and then pull the handle out on the back of the tool and it sucks the fluid out.

There are also tools that look something like a turkey baster where you squeeze to remove the fluid. NOTE – Don’t use a real turkey baster!! Just keep sucking the fluid out of the power steering reservoir until you can’t get any more out, be sure to put the old fluid into a container for storage and proper disposal later on.Refill – Time to open up the new bottle of power steering fluid and fill the reservoir back up. Be sure to use the proper fluid for your make and model. Check your manual or ask a clerk at the parts store if you’re unsure. Use your funnel if you need to and only fill the power steering fluid to the proper line.

On your dipstick you should see two lines, a cold line, and a hot line. Obviously your car and the new fluid are cold at this point so you’ll want to fill to the cold line. Once the level is good, reinstall the cap and wipe up any fluid you may have dribbled. Close your hood, you’re done FOR NOW.

Steering Check – Start your car up, let it run for a minute or two and then turn you steering wheel from side to side and make sure everything feels normal. If it doesn’t, double check your power steering fluid level and repeat.

Go for a Drive – You need to drive your car for several miles at this point before you can continue to the next step. You can choose to do that in the same day, or simply drive your car to work for a couple of days before continuing with your power steering fluid change.

That’s totally up to you, but I’d give it a good 30-50 miles of drive time. Also, be sure you are driving in long enough intervals for the engine to reach its normal operating temperature.Back to the Beginning – At this point you’re really just going to repeat steps 1-5. Remove your power steering cap again and check your fluid. It’s probably going to look pretty dirty even though you just changed it. This is because there was fluid in the lines that you could not get too before. When you were driving the old fluid and new fluid were mixing together.

That’s fine, in fact that’s what you wanted. Now you will go ahead and remove the fluid again and refill with fresh fluid just as before.Completion – The number of times that you need to complete steps 1-5 will vary from car to car, but 2 or 3 times is usually sufficient in most cases. Once the fluid looks pink and clean when you check it, your job is done. You won’t get 100% of the old fluid out and that’s fine, the idea here is just to replace the majority of the old worn out fluid with fresh fluid. Go ahead and give yourself a pat on the back, you’ve successfully changed your power steering fluid and prolonged the life of your power steering pump. Make sure you properly dispose of your old power steering fluid. Most transfer stations and recycling centers have a spot to recycle used oils. Remember, changing power steering fluid is an often overlooked aspect of car maintenance, but it’s still important.

Replacing Your Oil Step by Step

Posted on by .

Step 1: Run your auto for around five minutes to warm up the oil. Warm oil will deplete from the motor much simpler and faster than chilly oil will. At that point stop your auto on a level surface and captivate the stopping brake. Utilize an auto slope or jack stand to lift the auto so you can get to the channel attachment and oil channel. Chock the wheels to keep the auto set up. Once your auto is secure open up your hood, yet be watchful: Your motor may be exceptionally hot.

Step 2: Open your oil filler top. This permits air to experience the framework and will help the oil to stream into your channel skillet less demanding. Supportive clue: Place the pipe into the oil filler opening to remind you to supplant the new oil after you have emptied the old oil from your motor. You may be astounded how frequently somebody has depleted his or her oil and attempted to head out without refilling with new oil, a circumstance that typically spells fate for your motor.

Step 3: Crawl under your stopped auto with the attachment wrench, channel skillet, substitution fuel channel, and cloth. Place your channel plug, which is commonly close to the transmission chime lodging and underneath the motor square (counsel your holder’s manual for the precise area). Utilize the attachment wrench to extricate the channel plug. When you have relaxed the fitting, utilize a wrench or oil channel wrench to totally unscrew the attachment. Cautioning: The oil could be hot and will leave the channel rapidly, so be arranged to move the channel container to catch the oil. As the supply of oil gets low, the stream will ease off, so make a point to move the channel skillet appropriately. Channel the oil until the stream totally stops. This ought to take around two minutes. Wipe off the fitting opening and the channel plug. At that point take a gander at your channel fitting to verify it has great strings and a decent elastic gasket (a few vehicles have an inherent/formed gasket). When you have inspected the attachment, supplant it into your channel fitting opening. Make a point to utilize your hands to place and fix the attachment. Just utilize your wrench once you have hand fixed the fitting. Make an effort not to over-fix as this could harm the fitting or make it almost difficult to unscrew next time.

Step 4: Replace the oil channel. Place the oil channel, which ought to be as an afterthought of the motor. (Counsel your manager’s manual for the precise area of the oil channel.) Using your oil channel wrench, turn counterclockwise to extricate the channel and expel it from its lodging. Cautioning: There will be oil in the channel and it will spill, so verify you have set your oil channel container underneath the oil channel to catch it. It’s likewise a smart thought to hold a cloth under the channel when you unscrew it, since numerous autos have the channel mounted with the open side down. Uproot the old channel. Before you embed your new oil channel, make a point to utilize a tad bit of the new oil on the elastic gasket of the new channel. This will make a decent seal between the channel and the channel lodging so oil won’t spill when the motor is working. Hand-fix the channel into the channel lodging, verifying you have a tight seal. In any case once more, don’t over-fix as that can harm the strings or gasket which could result in a hole.

Step 5: Replace the oil. With the channel in the oil filler opening, utilize the new oil and refill the tank. Fill to a level that is somewhat not exactly the suggested sum in your manager’s manual, since there may even now be some oil left that did not completely deplete out. Supplant the filler top. Begin your auto and run it for around a moment, then check under the auto to verify no oil is spilling. At last, turn off the auto and utilize the dipstick to check whether you have to finish off the oil level, and finish off as required. Presently you are carried out! Yet an essential piece of changing your own oil is the thing that to do with the utilized oil. NEVER pour the oil down a sewer deplete; this could harm the sewer framework and nature. Reuse your utilized oil at a checked utilized oil reusing area, for example, a vehicle parts store, service station, or auto repair shop. A simple approach to do this is to pipe the oil from the channel dish over into the canister(s) that it came in, and afterward transport it to a reusing office.

Changing your own oil may appear overwhelming in case you’re new at it, however will probably be extensively simpler than you may have foreseen, and can spare you a couple of hundred dollars a year. With the right instruments and learning you will spare time and cash by changing your own oil

5 Possible Reasons Why Your Check Engine Light Is On

Posted on by .

Check engine light come on recently? Do you know why? There are many reasons why your check engine light may suddenly appear to ruin your day and haunt your dreams. Here are five potential problems your engine could be facing that is costing you money in gas mileage:

  1. Damaged Gas Cap Loose or missing gas caps can account for 147 million miles in evaporated gas each year. Your personal gas mileage may be reduced by .5 percent. If your check engine light comes on any time after your last gas run, be sure to check your gas cap to ensure that it is properly sealed and functional.
  2. O2 Sensor If you have ensured that your gas cap is working well, you might want to have your O2 sensor checked out as it is the number one cause of check-engine-light-mayhem. Every new car, and most cars produced after 1980, have an O2. The sensor is part of the emissions control system and feeds data to the ­engine management computer. The goal of the sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. If this sensor isn’t functioning properly, unreduced emissions will cause poor gas mileage and can put a large dent in your wallet. That could mean about $900 in extra fuel costs per year.
  3. Ignition Coils Too much heat under the hood? How are your spark plugs working for you? How does a 20% gas mileage decrease sound? If you answered yes, no, and yes to the last questions, you might need to have your ignition coils replaced. Keeping poor coils will spell disaster for your vehicle over time if not replaced reasonably soon.
  4. Catalytic Converter What is a Catalytic…what? Doesn’t matter. All you need to know is that if there’s a problem with this and it’s ignored too long it will suck the life right out of your gas tank and cost you over $1,000 in repairs. If your engine light comes on and you don’t believe it is any of the other potential engine-light-related problems – run, don’t drive, to the shop!
  5. Air Flow Sensor Unchanged air filters driving in dusty, dry regions may see your air flow sensor take a turn for the worst. With a name like “air flow sensor,” you probably don’t want to be without it for too long; air is kind of important to the most important parts of your vehicle.

If your check engine light comes on, please bring it by your local Oklahoma City metro area Valvoline Instant Oil Change Center to receive fast answers and quality service.

Valvoline Instant Oil Change Coupon

Posted on by .

Did you know that you can find valuable Valvoline instant oil change coupons on your computer? Just by doing a simple online search you can turn up loads of oil change coupons. You can pick from the very best coupons that offer the greatest discount. The Valvoline instant oil change service is a full service maintenance procedure. It will maintain your factory warranty for your vehicle. By obtaining regular oil change service you will be able to head off any unforeseen maintenance problems. Your car’s oil should be changed according to the factory schedule as a very minimum. Your oil filter should be changed at the same time. With your Valvoline instant oil change coupon, you will get a full maintenance checkup for your car.

This will include up to 5 quarts of Valvoline oil, check transmission fluids, power steering fluids, windshield washer fluids, and antifreeze. The technicians will also check your tire pressure, your air filter, the engine belts, and your wiper blades. The electrical system is not overlooked, your vehicle lights are inspected. You can get additional tests performed like checking out your battery condition. You can obtain tire rotation service if needed too. A trained technician can service the transmission or radiator if that is required as well. Most basic maintenance routines can be performed at the Valvoline instant oil change center. No appointment is necessary. Just drive up and present your oil change coupons to the technician. The convenience of finding oil change coupons online outweighs any other method of obtaining coupons.

The very best discounts are found online. While coupons for other oil change services are also found online, the instant oil change coupons can be used at your convenience without an appointment. You can fit a visit into new Valvoline instant oil change center on your busy schedule instead of the dealerships schedule. If you want to find an oil change coupon online, do an online search for instant oil change coupons. This will bring up several coupon sites that will have coupons for a Valvoline instant oil change. These websites can be found all over the Internet so using a search engine is the easiest way to find what you need.

Since these online coupons are available at any time day or night, the convenience cannot be beat. Even though coupons can be a pain from other sources such as a newspaper or even the occasional magazine advertised, the very best and deepest discount coupons will be found online. These coupons are available anytime for you which you can then take to your local Valvoline instant oil change center. So this is how you can save significant money on your vehicle oil changes. By finding Valvoline instant oil change coupons online you will be able to save money, save time, and maintain your car or truck in a safe and efficient manner. So don’t neglect this very important safety procedure. The small amount of money you spend now on oil changes can prevent very large repair bills in the future.

Cost to change Transmission Fluid

Posted on by .

You probably change the oil in your car or truck regularly. Most people follow a schedule to get this done or do it themselves every few months. Have you given any thought to changing the automatic transmission fluid? This lubricant works very hard and is subjected to lots of heat and pressure every time you drive. Just as your engine cannot run without oil, the transmission will not work without fluid. The fluid is a lubricant and cooling aide to the many complicated clutches and gears of a transmission. It should be changed on an interval as recommended in your manual, but at least every 30,000 miles.

One way to assess the fluid is to carefully pull the dipstick while the car is running, wipe and reinsert, then pull to check the fluid level. You should wipe a bit on a white paper towel and check the color which should be a clear red. You can also smell the fluid for traces of a burnt odor. If you see more brown than red color and smell any burnt fluid it is important to change the fluid right away. If your transmission has been shifting hard or slipping between shifts you might be able to save the high cost of a rebuild by changing the fluid. You can find transmission service at most oil change facilities and there are many shops that specialize in this. It is worth the cost to change transmission fluid and possibly save your transmission.

There may be a difference in the pricing of fluid changes, and this can be due to the method used. Some shops will suck the fluid out of the transmission with a machine and then simply refill it. This does not do what you really need. There is old fluid in the transmission that the machine will not access that will mix with the new fluid added. The only proper way to accomplish this change is to drop the transmission pan, unless you are lucky enough to have a screw in drain plug. Some vehicles have a drain plug and a screw in external transmission filter which makes the job much easier. Without these items the fluid change will be more involved and certainly messier. There is an internal filter that should be changed or cleaned when you change fluid.

In most cases you will not be able to do this at home. If you are able to lift the car sufficiently and have the correct tools you might accomplish this service, but for most it will be a challenge. In any case the transmission takes a lot of fluid and the filter is more costly than an engine oil filter. You should expect to pay anywhere from about $100 for an average car to $200 for a larger truck or SUV for a professional service. You should be sure to check the internet for coupons and specials, check the cost to change transmission fluid and save some money on this often ignored, but still very important maintenance.

Cheap Oil Change

Posted on by .

A discussion on Oil Change Frequency

The next time you are cruising in your fine automobile look at the little sticker in the top left hand corner of your windshield and see what the recommended time period for your next oil change is. It will include a date for recommended oil change or a set amount of miles till your next service. There is a good chance this reminder will say the oil needs to be changed after 3000 miles. This has been the advice since your grandpa was knee high to a grasshopper but is it really necessary to change the oil that often?

The answer lies in the pages of your trusty owner’s manual that should be sitting in your glove box. If you have misplaced yours or never got one to begin with you can find all the relevant information online by looking up your automobile via year and manufacturer. As automobile technology has improved and the oil industry has created better quality engine oils the length between changes may have changed for your vehicle. Most automakers now call for 7,500 up to 10,000 miles before the next service. That is up to three times longer than what the local oil change shop recommends.

So who is right? The average local service place or dealer has a vested interest in getting you to come in every 3000 miles which, of course, is profit. Every time you pull in there is a possibility of finding something else that you can be up sold besides the standard oil replacement. Air filters, wipers, and small engine repairs can add thousands of dollars to the company’s bottom line. That’s good if you’re in the oil change business. Not so much if you are the consumer who wants to look after their vehicle at an affordable price. One other reason the oil change places recommend the 3000 mile change is because they use what is called the severe driving conditions recommendation found in the owner’s manual. Unfortunately, they have usually not gotten around to reading the newer manuals that have increased even the severe driving conditions recommendations to higher levels.

If you drive a Hyundai or Kia with a turbo engine you will need to change the oil every 5000 according to the manufacturer. Most others will be 7,500 to 10,000 so check your manual to be sure. When it comes to looking after your automobile, do not take the advice of dealerships and lube shops that have a clearly vested interest in profiting off you to the maximum. Instead take what they say with a grain of salt, do your own research and consult with minimum three to four different sources to find the most effective and affordable oil change option out there. There are always good auto shops and lube services that will give you the bang for your buck that you deserve. Quality businesses understand that by offering you a fair price, and doing a great job they will win your business time and time again, not to mention gain some referrals. TIP: Looking for an even better deal? Keep an eye out for high quality companies that offer oil change coupon discounts.

Where to Get A Oil Change

Posted on by .

Changing your oil is certainly one of the most important things you can do to maintain the performance and longevity of your vehicle. There are a wide variety of places to get an oil change.

These include:

  • Dealerships
  • Quick Change Oil Change and Lube Centers
  • Local garages
  • Big box stores like Sam’s Club, Costco, Wal-Mart Service Center, and even K-Mart.

If you walk into any of these stores, you can often get on a mailing list to receive coupons via email or postal mail. You can also check those big bundles of coupons that come in the mail. These often have discount coupons from more than one vendor. Val-Pak is a popular service many repair centers use to promote their discounts and offer oil change coupons.

A lot of the big nationwide “Quick-Change” type places offer coupons right on their website, which can be printed and downloaded. Optionally, with many of these chains, you can sign up to receive others in the mail, as discussed earlier. Oil changes on a standard vehicle averages around $20-$35. $5 and $10 discounts on oil change specials is common, so think of it like getting a free oil change every third or fourth time you go!

Asking The Right Questions Often the most successful businesses have catered to our convenience – from fast food to ATM machines to Ticketmaster. It is no different with auto service centers. Admittedly, there have been horror stories about quick oil change stores. We’ve all heard them before. Perhaps a customer is convinced to buy more services.

More appropriately, some oil change personnel are recommending service that didn’t need to be done, all because of pressure to “upsell” the customer on services they may not even need. This is not smart. The service center should look at a coupon-wielding customer as an opportunity to show their commitment to customer care and performing superb service and building trust.

Unfortunately sometimes this is not the case. Some mechanics have reported getting cars into their repair shops after going to a quick oil change location due to stripped oil drain plugs, oil filters wiped clean but not replaced, wrong oil filters, cars not filled to their recommended levels with oil, and so forth. Bear in mind part of this is simply the nature of the business model. Many of these companies use oil change coupons as a way to lure customers in for an inexpensive service – the oil change.

This is a sales tactic to “get people in the door”. Honestly, there is really nothing wrong with this model. It is a tried and true model and is used in many other legitimate businesses as well. The majority of quick change motor oil business are legitimate and only recommend necessary changes or service in addition to the oil change. But occasionally, there are service companies that do things described at the beginning of this article. Naturally none of us want to be scammed by an oil change company.

So here are a couple things you can do to ensure the safety of your vehicle and keep your pocketbook safe. Get your vehicle serviced regularly and keep a paper trail Whatever service is done to your vehicle – like tune ups, tire rotations, belt replacements, fluids, and so forth should all be done per the vehicle manufacturer’s specs. It’s important because it seems to be the nature of auto service techs to blame the vehicle problem on ANY service you might have had done to the vehicle, and especially if you DIDN’T have a service done that needed to be done. So get your vehicle serviced per the manufacturer and save all your paperwork. Don’t be afraid to ask targeted questions and write down the answers. For instance, ask what type of oil they are putting in the vehicle.

Ask what oil filter they will be using. Ask them to write these items down on the invoice. Ask them to write down the oil level before draining. Ask them to write down how many quarts of oil they used to refill the engine. Keep your paperwork. There are many other things you could also ask an auto technician, especially if you are someone who knows your way around under the hood of a car. If you wish to do so, find your local friend who is an auto repair nut and ask them for any other questions you could ask the oil service center. Your local friend could possibly recommend a good location they are familiar with. A paper trail with everything regarding your vehicle is important and can save you thousands of dollars. Besides, if you are interested in oil change coupons, it is likely you want to save every penny you can when it comes to caring for your vehicle in the first place. And really, who can blame you?